|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
2 Watt RM Dual Series DC/DC Converters Features 1-2 Watt Regulated Output Low Cost Industry Standard 24 Pin DIP Package Water Washable Construction 5 Year Warranty Customs and Specials Available Selection Chart MODEL *5D5.090RM 5D12.085RM 5D15.070RM 12D5.090RM 12D12.085RM 12D15.070RM 24D5.090RM 24D12.085RM 24D15.070RM INPUT RANGE VDC MIN 4.5 4.5 4.5 10.8 10.8 10.8 21.6 21.6 21.6 MAX 5.5 5.5 5.5 13.2 13.2 13.2 26.4 26.4 26.4 VDC 5.0 12.0 15.0 5.0 12.0 15.0 5.0 12.0 15.0 OUTPUT mA 090 085 070 090 085 070 090 085 070 Power W 1 2 2 1 2 2 1 2 2 Description The CALEX RM dual output series provides a regulated 5, 12 and 15 Volt output from a power bus. The RM Duals are fully isolated input to output. The industry standard case and pinout makes the RM dual series an excellent choice for conversion requirements. *Agency Approvals: CSA/UL 60950 Mechanical Specification SIDE VIEW 1.25 0.40 General Specifications * All Models Isolation Isolation Voltage Input to Output Input to Output Capacitance Environmental Case Operating Range No Derating Thermal Impedance (1) Storage Range Unit Weight Case Material Units MIN TYP 850 50 VDC pF Stand-off 4 Places 0.00 0.03 0.15 0.020O MIN MAX TYP MIN MAX TYP A 123 10 11 12 0.70 0.600 -25 C 85 30 C/Watt -55 C 100 12 gram Non Conductive Plastic 0.80 24 23 22 0.07 0.000 0.100 0.200 15 14 13 1.100 1.18 0.900 1.000 0.000 0.10 BOTTOM VIEW Mechanical tolerances unless noted: X.XX dimensions: 0.025 X.XXX dimensions: 0.005 Pin 1, 24 2, 23 3, 22 10, 15 11, 14 12, 13 Function +INPUT -OUTPUT CMN CMN +OUTPUT -INPUT 2401 Stanwell Drive * Concord, California 94520 * Ph: 925/687-4411 or 800/542-3355 * Fax: 925/687-3333 * www.calex.com * Email: sales@calex.com 1 3/2001, eco# 041007-1,060417-2 2 Watt RM Dual Series DC/DC Converters Input Parameters* Model Voltage Range Input Current Full Load No Load Efficiency Switching Frequency MIN MAX TYP TYP TYP TYP 5D5.090RM 4.5 5.5 375 40 48 5D12.085RM 4.5 5.5 716 53 57 5D15.070RM 4.5 5.5 710 60 59 220 12D5.090RM 10.8 13.2 170 50 44 12D12.085RM 12D15.070RM 10.8 13.2 295 50 57 10.8 13.2 300 50 59 Units VDC mA % kHz Model Voltage Range Input Current Full Load No Load Efficiency Switching Frequency TYP TYP TYP TYP MIN MAX 24D5.090RM 21.6 26.4 87 20 43 24D12.085RM 21.6 26.4 155 20 55 220 24D15.070RM 21.6 26.4 153 20 57 Units VDC mA % kHz Output Parameters* Model Output Voltage Output Voltage Accuracy Rated Load Range Load Regulation Min-Max Load Line Regulation Min-Max Line Noise, Peak - Peak (2) Temperature Coefficient Short Circuit Model Output Voltage Output Voltage Accuracy Rated Load Range Load Regulation Min-Max Load Line Regulation Min-Max Line Noise, Peak - Peak (2) Temperature Coefficient Short Circuit MIN MAX MIN MAX TYP MAX TYP MAX TYP TYP 24D5.090RM 5 4.80 5.20 0 90 0.4 2 0.1 1 MIN MAX MIN MAX TYP MAX TYP MAX TYP TYP 5D5.090RM 5 4.80 5.20 0 90 0.4 2 0.1 1 5D12.085RM 12 11.64 12.36 0 85 0.5 1 0.5 1 5D15.070RM 15 14.55 15.45 0 70 0.5 1 0.5 1 50 200 Continuous, Auto Recovery 24D12.085RM 12 11.64 12.36 0 85 0.5 1 0.5 1 50 200 Continuous, Auto Recovery 24D15.070RM 15 14.55 15.45 0 70 0.5 1 0.5 1 Units VDC VDC mA % % mV P-P ppm/C 12D5.090RM 5 4.80 5.20 0 90 0.4 2 0.1 1 12D12.085RM 12D15.070RM 12 11.64 12.36 0 85 0.5 1 0.5 1 15 14.55 15.45 0 70 0.5 1 0.5 1 Units VDC VDC mA % % mV P-P ppm/C A Notes: * All parameters measured at Tc = 25C, nominal input voltage, and full rated load, unless otherwise noted. Refer to CALEX Application Notes for definition of terms, measurement circuits, and other information. (1) The case thermal impedance is specified as the case temperature rise over ambient per internal watt dissipated. All tests with connections to all active pins. Operation with connection to only one pin will not harm the unit. (2) (3) (4) Noise is measured per CALEX Application Notes. Measurement bandwidth is 0 - 20 MHz. Noise measurements are made with 0.1F ceramic capacitor connected between output and CMN pins. Specifications subject to change without notice. Water Washability - Calex DC/DC converters are designed to withstand most solder/wash processes. Careful attention should be used when assessing the applicability in your specific manufacturing process. Converters are not hermetically sealed. 2401 Stanwell Drive * Concord, California 94520 * Ph: 925/687-4411 or 800/542-3355 * Fax: 925/687-3333 * www.calex.com * Email: sales@calex.com 2 3/2001, eco# 041007-1,060417-2 |
Price & Availability of 24D12085RM |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |